
Before installing a When it comes to pool enclosures, it's important to be aware of the legal requirements to avoid any unpleasant surprises. Regulations vary depending on the size and height of the enclosure. Here's everything you need to know to be compliant.
1. Swimming pool enclosures and regulations in France
Swimming pool enclosures are subject to the Town Planning Code. The procedures differ depending on:
- The height of the shelter (less than or greater than 1.80 m)
- The surface area of the swimming pool (less than or greater than 10 m² and 100 m²)
- The location (protected area, classified sector, specific local urban plan)
2. Prior declaration of works
For a pool enclosure between 1.80 m high and 20 m² in area , prior notification to the town hall is mandatory. You must provide:
- Cerfa form no. 13703*07
- A site plan and a descriptive notice
- A photo or sketch of the shelter
The town hall has a processing time of approximately 1 month.
3. Building permit
If your pool enclosure extends beyond:
- 20 m² of covered area
- or is located in classified area requiring an opinion from the Architects of the Buildings of France
A building permit will be required. The processing time is generally 2 to 3 months.
4. Special cases
- For shelters less than 1.80 m high and installed on an existing pool of less than 100 m² , no formalities are required (outside protected areas).
- If your house is in In a listed building or protected area, a permit or declaration may be required, even for a small shelter.
5. Penalties for non-compliance
Installing a pool enclosure without authorization can result in fines and mandatory dismantling. It is therefore essential to follow the proper procedures before starting the project.
Our advice
Always check your local council's Local Urban Development Plan (PLU) before ordering your pool enclosure. The CoverPro Solution team can assist you in preparing the necessary documents.